Cakewalk // Documentation // SONAR X3 // QuadCurve Equalizer module
Table of Contents Previous Next Index

ProChannel (Producer and Studio only) ► QuadCurve Equalizer module

list-image
To show/hide compact mode in the Inspector. Click the Display button at the bottom of the Inspector, point to Module Options > ProChannel and choose Compact EQ Module.
list-image
To show/hide compact mode in the Console view. Click the Console view Options menu, point to ProChannel and choose Compact EQ Module.
A. Clipping LED B. QuadCurve Equalizer enable/disable C. Style (Hybrid, Pure, E-Type or G-Type) D. Graph E. Band enable/disable (Low, Low-Mid, Mid-High, High) F. Frequency G. Q H. Level I. High band filter type J. Low Pass filter frequency K. Low band filter type L. High Pass filter frequency M. High Pass filter enable/disable N. High Pass filter slope (Q) O. Gloss enable/disable P. Low Pass filter slope (Q) Q. Low Pass filter enable/disable
A. Low band (red) B. Low-Mid band (yellow) C. Mid-High band (green) D. High band (blue) E. High Pass filter (black) F. Low Pass filter (black)
list-image
Clipping LED. Shows if the input signal to the QuadCurve Equalizer module is clipping. If there is any distortion in the ProChannel signal chain, the clipping LEDs let you identify where the clipping occurs.
list-image
QuadCurve Equalizer enable/disable . Enables/disables the QuadCurve Equalizer module.
list-image
Style. Specifies the equalizer algorithm. Choose between transparent equalization (Pure) or equalization for character (Hybrid, E-Type and G-Type). Each style provides a different interaction between Q and Level settings. The styles are as follows:
Table 178. EQ types  
list-image
Graph. Shows the equalization curve. Each band is identified by a unique color, and the sum of all bands is displayed as a white line. Adjust the equalizer by manipulating the graph. For details, see To interact with the QuadCurve Equalizer graph.
list-image
Band enable/disable. Enables/disables the Low , Low-Mid , Mid-High and High bands. Enabling a band allows it to be processed with equalization. The knobs and graph curves are color-coded per band:
list-image
Frequency. Sets the center frequency for the selected band (Low, Low-Mid, Mid-High and High). The valid frequency range for each band is as follows:
list-image
Q. Sets the width of the selected band (Low, Low-Mid, Mid-High and High), which determines the amount of surrounding frequencies that will be affected when adjusting the band. A low Q value gives a high bandwidth for the filter band, resulting in a smooth shaping of the sound and little audible 'coloration'. Filtering will however be less accurate, since a wide frequency range around the center frequency will be affected. A high Q value reduces the bandwidth, improving filter accuracy but also creating sharp dips or peaks in the frequency spectrum. The width of the Q is expressed in terms of octaves. The valid range is 0.1 to 16.0 and the default value is 1.3.
list-image
Level. Boosts or attenuates the selected band (Low, Low-Mid, Mid-High and High).The valid range is -18.0 dB to +18.0 dB and the default value is 0 dB. The Level control interacts with the Q parameter, depending in the selected EQ type (Hybrid, Pure, E-Type or G-Type).
list-image
Low band filter type. Toggles the Low band between Bell and Low Shelf mode. In Bell mode, the Low band boosts or attenuates a range of frequencies around a central point in a bell shape. In Low Shelf mode, the Low band boosts or attenuates the set frequency and all frequencies below it.
list-image
High band filter type. Toggles the High band between Bell and High Shelf mode. In Bell mode, the High band boosts or attenuates a range of frequencies around a central point in a bell shape. In High Shelf mode, the High band boosts or attenuates the set frequency and all frequencies above it.
list-image
Low Pass filter enable/disable . Enables the Low Pass filter, which attenuates high frequencies above the Low Pass frequency while allowing other frequencies to pass unfiltered.
list-image
Slope (Low Pass). Specifies the ratio of how the Low Pass filter attenuates frequencies above the Low Pass frequency. Slope is expressed in decibels per octave. The range is from 6 dB to 48 dB in 6 dB increments.
list-image
LP. Specifies the cut-off frequency for the Low Pass filter.
list-image
High Pass filter enable/disable . Enables the High Pass filter, which attenuates low frequencies below the High Pass frequency while allowing other frequencies to pass unfiltered.
list-image
Slope (High Pass). Specifies the ratio of how the High Pass filter attenuates frequencies below the High Pass frequency. Slope is expressed in decibels per octave. The range is from 6 dB to 48 dB in 6 dB increments.
list-image
HP. Specifies the cut-off frequency for the High Pass filter.
list-image
Gloss . Adds a smooth breath and presence to the high end without any harshness using a unique gloss filter.
A. Click to open fly-out panel B. Input meter C. EQ plot D. FFT spectrum analyzer E. Output meter F. Pin fly-out panel G. Close fly-out panel
Do one of the following:
Do one of the following:
Click the pin button in the top right corner of the fly-out panel.
Copyright © 2024 Cakewalk, Inc. All rights reserved
Sitemap | Privacy Policy | Legal